Lock up DRAGON - Revision history

Lennarz at 17:56, 18 January 2022

2022-01-18T17:56:57Z

← Older revision		Revision as of 10:56, 18 January 2022
Line 1:		Line 1:
	~~<big>~~Lock-up Procedure (Radio-active Beams)~~<big>~~		Lock-up Procedure (Radio-active Beams)

	==Overview==		==Overview==

Lennarz at 17:56, 18 January 2022

2022-01-18T17:56:28Z

← Older revision		Revision as of 10:56, 18 January 2022
Line 1:		Line 1:
	Lock-up Procedure (Radio-active Beams)		<big>Lock-up Procedure (Radio-active Beams)<big>

	Overview		==Overview==

	Before radio-active beam can be delivered to DRAGON, fence gates must be closed and locked to prevent access within 1 metre of where beam might stop in the target, separator, or end detector.		Before radio-active beam can be delivered to DRAGON, fence gates must be closed and locked to prevent access within 1 metre of where beam might stop in the target, separator, or end detector.

	When is lock-up required?		==When is lock-up required?==
	Lock up is required if		Lock up is required if

	HEBT2:MB0 is on, to direct beam to DRAGON, and		*HEBT2:MB0 is on, to direct beam to DRAGON, and
	the ion source is 'downstairs' (not OLIS)		*the ion source is 'downstairs' (not OLIS)

	How to lock up DRAGON		==How to lock up DRAGON==
	There is a key for each of the (many!) gates which give access to the DRAGON target and separator. Checking to make sure that no-one is inside the area, lock each gate and remove the key. Take the keys to the transfer lock (located north of the End Detector region) and turn each key clockwise.		There is a key for each of the (many!) gates which give access to the DRAGON target and separator. Checking to make sure that no-one is inside the area, lock each gate and remove the key. Take the keys to the transfer lock (located north of the End Detector region) and turn each key clockwise.
	Once all keys are in, the DRAGON ASU key can be removed. Insert it in the 'ASU key release unit' and turn it clockwise.		Once all keys are in, the DRAGON ASU key can be removed. Insert it in the 'ASU key release unit' and turn it clockwise.

	Detailed instructions for Lockup and Access are provided at the transfer lock.		Detailed instructions for Lockup and Access are provided at the transfer lock.

Lennarz: Created page with "Lock-up Procedure (Radio-active Beams) Overview Before radio-active beam can be delivered to DRAGON, fence gates must be closed and locked to prevent access within 1 metre o..."

2022-01-18T17:35:56Z

Created page with "Lock-up Procedure (Radio-active Beams) Overview Before radio-active beam can be delivered to DRAGON, fence gates must be closed and locked to prevent access within 1 metre o..."

New page

Lock-up Procedure (Radio-active Beams)

Overview

Before radio-active beam can be delivered to DRAGON, fence gates must be closed and locked to prevent access within 1 metre of where beam might stop in the target, separator, or end detector.

When is lock-up required?
Lock up is required if

HEBT2:MB0 is on, to direct beam to DRAGON, and
the ion source is 'downstairs' (not OLIS)

How to lock up DRAGON
There is a key for each of the (many!) gates which give access to the DRAGON target and separator. Checking to make sure that no-one is inside the area, lock each gate and remove the key. Take the keys to the transfer lock (located north of the End Detector region) and turn each key clockwise.
Once all keys are in, the DRAGON ASU key can be removed. Insert it in the 'ASU key release unit' and turn it clockwise.

Detailed instructions for Lockup and Access are provided at the transfer lock.